PaiaTalk
http://www.paia.com/talk/

BCKit-1 build
http://www.paia.com/talk/viewtopic.php?f=29&t=339
Page 1 of 1

Author:  PAiA-Scott [ Wed Aug 17, 2011 3:55 pm ]
Post subject:  BCKit-1 build

The BCKit-1 is a simple project for building a two transistor ribbon controller as outlined here on the PAiA website:

http://www.paia.com/bckit1/

In the pdf linked below are details for a variation to the build with a 3v solar cell as the power source with a controller strip made from a piece of anti-static conductive plastic. The cell works as a light sensor so covering it with your hand works to vary the voltage and the frequency of the sound produced--the probe can be used to set an initial frequency and the light to the cell, the variation, or vice versa.

http://paia.com/manuals/docs/PTph/bck1/ ... _Build.pdf

Author:  PAiA-Scott [ Thu Jan 30, 2014 1:21 pm ]
Post subject:  Re: BCKit-1 build

This Radio Shack / Make project is along the same lines and possibly a way to use your BCKit-1:

http://www.radioshack.com/graphics/uc/r ... Pencil.pdf

Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/
Not able to open ./cache/data_global.php