|9752 Sample and Hold
|Page 1 of 1|
|Author:||PAiA-Scott [ Mon Apr 01, 2013 12:37 pm ]|
|Post subject:||9752 Sample and Hold|
The line above is not a link to the manual, but one for posting a reply.
The 9752 monitors the input signal voltage and copies it to the output, synchronized to changes in an input control voltage (CV) or an input clock, or synchronized to an internal clock if there is no external input. The input may be an audio or control signal. One typical application uses noise as an input signal and a variable rate clock to control sampling. This provides a random control voltage source from the module output.
The module's use with audio signals is enhanced by a switch option to change the function from "sample and hold" to "gate and hold", where the output tracks the input signal as long as the control input voltage is above a threshold (or, if selected, the internal clock rises). After the control voltage drops, the output voltage freezes until the next high-going transition of the control voltage (or the internal clock rises again).
Email firstname.lastname@example.org for details about purchasing higher resolution versions. The page or two pamphlets to the larger many-paged manuals are priced in a range from $0.95 to $4.75 each.
For this document, click on the following Attachment link.
"9752 Sample and Hold" documentation.
http://paia.com/manuals/docs/PTman-doc/ ... es_200.pdf
http://paia.com/manuals/docs/PTman-doc/ ... is_200.pdf
|Page 1 of 1||All times are UTC - 6 hours [ DST ]|
|Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group