PaiaTalk
http://www.paia.com/talk/

audio signal INTO L2E converter?
http://www.paia.com/talk/viewtopic.php?f=8&t=733
Page 1 of 1

Author:  James [ Wed Nov 09, 2016 8:53 pm ]
Post subject:  audio signal INTO L2E converter?

Can audio signals be input into the converter? Use it for simple distortion?

James

Author:  PAiA-Scott [ Thu Nov 10, 2016 1:52 pm ]
Post subject:  Re: audio signal INTO L2E converter?

Yes, audio can be patched through this section or the inverter/gain section, or, the two series-connected.

The non-linear transfer through the L2E section would work to alter the waves from a VCO's triangle or sine waves, or, exaggerate signal peaks of music from a CD, MP3, etc. Settings could be such that clipping occurs, introducing this sort of distortion.

Clipping distortion can also be obtained through the inverter/gain section but the output would need attenuation to be brought back down to the same level as the input signal source.

Author:  James [ Thu Nov 10, 2016 8:13 pm ]
Post subject:  Re: audio signal INTO L2E converter?

nice....put another function under this module's description..:) I'll try it out.

Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/
Not able to open ./cache/data_global.php