It is currently Sat Nov 25, 2017 4:45 am




Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 1 post ] 
 9201FK as cv to MIDI converter 
Author Message
User avatar

Joined: Sun Nov 09, 2008 2:49 pm
Posts: 726
Post 9201FK as cv to MIDI converter
Hello Andrew.

Thanks for checking. We have a circuit board project kit for a cv to MIDI converter called the 9201FK MIDI Fader. It was planned to be in a box with sliders to work as controls for MIDI devices, but didn't ever make it into production. If you get the kit, you'll see the assembly instruction manual for the circuit board kit is titled MIDI Drum Computer, but once built with the MIDI Fader version of firmware, it converts 0-5v dc levels to MIDI Control Change, Pitch Wheel, and Channel Pressure messages. Attached is the supplemental information provided with the MIDI Fader EPROM firmware which details the way the eight cv inputs relate to the MIDI messages. For the 0-5v input range the MIDI values range 0-127. Another kit, the 9212K ProcAmp circuit board project is a perfect companion to the either version of the MIDI Drum Computer board as it works as a power supply and sensor conditioner. Coupled with the 9201FK, it work as eight variable voltage controls or as level controls for external dc voltage ranges such as the control voltages available from the PAiA 9505 Theremax theremin.


http://www.paia.com/proddetail.asp?prod=9201FK

http://www.paia.com/proddetail.asp?prod=9212K

If you need MIDI note messages to be sent in response to voltages sent to the 9201 board, it must be the 9201DK version. Mainly, it would work to send drum voice control in response to sensor strikes, but the gate-trigger output from Theremax going into the 9201DK would result in MIDI note messages for the activity. It would just be a single note according to the input to which the trigger is connected. A 9201 set-up each way would be best since it's not practical changing from one version to the other.

Alternatively, you could stay in the analog realm and connect the PAiA P9700S modular synthesizer package to be controlled by Theremax. It could sound the patches on the modular, or, process external audio and voltage through the voltage-controlled Filter and/or Amplifier/Modulator/Mixer.

Thank you.

Sincerely, Scott Lee

Attachment:
9201FaderNotes.pdf [47.68 KiB]
Downloaded 1417 times


Andrew Cooke wrote:
> Hi There,
>
> I'm interested in converting the CV output from a theremin into midi to control Live. You were mentioned on the Boingboing blog as having such a device but I can't find it on your website. I am a bit of a novice though so maybe I've missed it. Any help would be greatly appreciated.
>
> Thanks,
>
> Andrew Cooke.
>

_________________
Scott Lee
scott@paia.com


Thu Mar 12, 2009 4:46 pm
Profile
Display posts from previous:  Sort by  
Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 1 post ] 


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © phpBB Group.
Theme designed by Vjacheslav Trushkin , adapted for PAIA by Illumimedia Design Studios
Not able to open ./cache/data_global.php