PAiA HomeAbout PAiABrowse Online CatalogView CartFAQContact us

Using the Hot Springs Reverb

Hot Springs Schematic

 

In The Studio: The Hot Springs tanks and circuit board should be mounted in a location that is free of ambient electro-magnetic fields. The input and output jacks are typically placed on a patch panel with other effect's inputs and outputs. In use, the effects or aux send buss of the console patches to the Hot Springs input and the output of the Hot Springs returns to one of the mixer inputs for control of reverb level in the total mix.h

Instrument Applications: Use a Y cord or splitter to send the instrument signal to both channel one of your amp and the Hot Springs input. Then patch the Hot Spring's output to channel two of the amp. Adjust the amoung of reverb with channel two's volume control and adjust EQ to suit..

View Buy Hot Springs Reverb Kit

Return to previous page Return