Search found 80 matches

by Kyhotay
Sat Mar 05, 2016 10:55 am
Forum: PAiA Jabber
Topic: Synchronization Question
Replies: 15
Views: 55053

Re: Synchronization Question

Thanks, Scott! I'll give it a try as soon as I put it back together!! I do want to clear one thing up. Does the 4780 start when the TR909 starts (or in my case my DAW connected to the 9700 MIDI IN through my MOTU MIDI OUT)? Or is the timing running and you manually hit the 4780 start button? Brian
by Kyhotay
Mon Feb 29, 2016 7:40 pm
Forum: PAiA Jabber
Topic: Rebuild a 4700
Replies: 1
Views: 14561

Re: Rebuild a 4700

I completely rebuilt my 4700. Mainly I created new front panels, recapped, replaced switches & pots. Changed all jacks to 1/8" and upgraded critical op amps to Burr Brown. I frankensteined a 9700 regulated 15VDC power supply to do +/-9V and added regulated +18VDC. The key thing to know is the 4720 V...
by Kyhotay
Thu Oct 29, 2015 10:41 am
Forum: PAiA Jabber
Topic: Chord EGG 2015
Replies: 23
Views: 79327

Re: Chord EGG 2015

I am curious if you intend to allow control voltage inputs and outputs in order to be able to integrate the randomness into a modular setup. It would make a really cool Frac module!
by Kyhotay
Wed Feb 11, 2015 7:43 pm
Forum: PAiA Jabber
Topic: 6750 hyperflange/choorus
Replies: 1
Views: 12503

Re: 6750 hyperflange/choorus

Sure! You can give it to me and I'll put in the $200 worth of chips!!
by Kyhotay
Sat Jan 17, 2015 9:29 pm
Forum: PAiA Jabber
Topic: Cable construction for CV's in and out of the 9700?
Replies: 7
Views: 22834

Re: Cable construction for CV's in and out of the 9700?

And just to add to this I suspect the pre-made patch cables PAiA sells are tip-tip, shield-shield. Right, Scott?
by Kyhotay
Sat Jan 10, 2015 6:03 pm
Forum: PAiA Jabber
Topic: Cable construction for CV's in and out of the 9700?
Replies: 7
Views: 22834

Re: Cable construction for CV's in and out of the 9700?

I'm not sure how big an issue this is. All patch cables that came with my Voyager XL and MS-20 are all grounded. I have grounded patch cords going between and within various synths and modules. I don't think I've run across manufactured patch cords that weren't grounded. Ground loops has not been an...
by Kyhotay
Fri Jan 02, 2015 12:07 am
Forum: PAiA Jabber
Topic: 9720 glide output mod
Replies: 3
Views: 15241

Re: 9720 glide output mod

I do have that schematic. But I am lazy and it's hard to see up close so DIY is out for me!
by Kyhotay
Mon Dec 29, 2014 7:23 pm
Forum: PAiA Jabber
Topic: 9720 glide output mod
Replies: 3
Views: 15241

Re: 9720 glide output mod

What a cool idea. I suppose since the norm/lfo switch doesn't drop the freq as advertised, you could replace the switch with a jack. Hmmm...

I'm just waiting for the 9700 slew/lag module to come out!
by Kyhotay
Fri Oct 10, 2014 1:39 pm
Forum: PAiA Jabber
Topic: MIDI2CV8 DIP switch to rotary switch?
Replies: 5
Views: 21392

Re: MIDI2CV8 DIP switch to rotary switch?

Scott, is there an advantage to using two 16 position rotary encoders as opposed to a 16 position for the MIDI channel select and an 8 position for the mode select?
by Kyhotay
Thu Oct 09, 2014 4:52 pm
Forum: PAiA Jabber
Topic: MIDI2CV8 DIP switch to rotary switch?
Replies: 5
Views: 21392

Re: MIDI2CV8 DIP switch to rotary switch?

Funny thing, I asked Scott about this last month. He pointed me in the right direction for a 16 and 8 position rotary encoder. I just haven't had the time to design a panel.