It is currently Sun Nov 19, 2017 5:48 am




Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 1 post ] 
 PAiA 6760 Parametric EQ info 
Author Message
User avatar

Joined: Sun Nov 09, 2008 2:49 pm
Posts: 725
Post PAiA 6760 Parametric EQ info
Hello Ed.

Thanks for writing with an interest in the PAiA 6760 Parametric EQ. Sorry, but no, we do not have details for this in pdf form. We're working towards making the kit documentation in a form that can be accessed through our site, but it could be a while before it's all there.

The 6760 Parametric EQ is an older kit for us, from back at a time we had a rack-mount road-case that could be used to hold a power supply unit and multiple, rack-mount devices. In the series was the Vocoder, Quadrafuzz, Dual Limiter, Hyperflange+, Master Synchronizer, a Power Supply, etc... All these devices were made with the intent of connection to this external, regulated, dual-dc power supply (or some other functional equivalent).

So, when you order the Parametric EQ kit and panel accessory items, you have the pieces to make the kit mounted to a rack-mount panel. Wires connect this unit to a power supply (use our 9770R-12 or 9770R-15, or similar). There are eight 1/4" phone jack connectors on the unit for the four channels of eq/ualization (frequency). These can work individually, or combined in series or parallel. Used as four individual channels, you have four inputs and four outputs. There are three controls for each of the four channels--Frequency, Q (width), and Boost/Cut. Series connection can be two-channels of two-band control or one-channel of four-band control. Parallel use is by sending one channel to all four inputs and mixing the four outputs back to one.

Building the kit and panel with a power supply would result in a board fixed to the rack-panel and wires to the power supply board with wires from it to a wall-mounted ac transformer. The installation in a case, chassis, cabinet, etc. would be left to you. A piece of wood or cardboard can hold the pieces steady and prevent the solder side of the boards from touching anything that might cause trouble for testing and or subsequent use. Rack-mount road cases are available and would finish things off, but can be pricey. Project boxes can be found at RadioShack, Mouser.com, Jameco.com, Digikey.com, etc...

Thank you.

Sincerely, Scott Lee

Ed Evans wrote:
> do you have any PDF or such on things like the parametric EQ?.
> I cant tell what the controls, or frequency bands, or anything from the web pix..
>
> thanx
>
> e
>

_________________
Scott Lee
scott@paia.com


Wed Dec 31, 2008 12:46 pm
Profile
Display posts from previous:  Sort by  
Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 1 post ] 


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © phpBB Group.
Theme designed by Vjacheslav Trushkin , adapted for PAIA by Illumimedia Design Studios
Not able to open ./cache/data_global.php