frac cabinets

Free-for-all discussion about PAiA products and the kinds of audio you produce with them.
Post Reply
Billb3
Posts: 61
Joined: Wed Jan 01, 2014 1:36 pm
Hometown: Toronto
Favorite topic: custom mods
Super Robot Smashing Puzzle Time!: 12
Location: Toronto

frac cabinets

Post by Billb3 »

I need a cabinet of sorts to put my 2720/4700 modules in.

are there blueprints for the wing cabinets? (although I suppose it wouldnt be that hard to figure out a reasonable config).

curious as to what others have done when they had to home brew cabinets.

bill
toneman
Posts: 99
Joined: Thu Sep 24, 2009 2:14 pm
Hometown: sacto texas
Favorite topic: electric vehicles
Super Robot Smashing Puzzle Time!: 12

Re: frac cabinets

Post by toneman »

Easiest boxes are like PAiA used to build: particleboard. Use 1/2in particle board that is rabbited on the edges. Then use 1/4 x 1/4 aluminum angle from home depot for mounting panels. drill new holes as U need them. Make an easilly removable back (or top) for hooking up the power supply. 8-)
IF U THINK U GOT A GOOD DEAL....U DID!!
Billb3
Posts: 61
Joined: Wed Jan 01, 2014 1:36 pm
Hometown: Toronto
Favorite topic: custom mods
Super Robot Smashing Puzzle Time!: 12
Location: Toronto

Re: frac cabinets

Post by Billb3 »

toneman
Posts: 99
Joined: Thu Sep 24, 2009 2:14 pm
Hometown: sacto texas
Favorite topic: electric vehicles
Super Robot Smashing Puzzle Time!: 12

Re: frac cabinets

Post by toneman »

That aluminum fracrack looks great!
IF U THINK U GOT A GOOD DEAL....U DID!!
Post Reply