It is currently Fri Aug 14, 2020 7:09 am

Post new topic Reply to topic  [ 3 posts ] 
 2720 noisy VCA problem 
Author Message

Joined: Wed Sep 25, 2013 10:31 pm
Posts: 58
Post 2720 noisy VCA problem
I finally got around replacing some modules in my working 2720 with those from the other one (the modules with the brown jacks). While the hum is mostly gone, and the signal is nice and strong (through the BPF at least), the VCA has some serious issues. There is a lot of noise and when patched to one of the LFOs it makes a kind of "thump-pa-thump" sound with nothing routed through it, and even then it seems to let only pass a signal at high CV levels and it's still distorted. While I understand that the cause could be failing components and bad solder joints, I'd first like to hear some opinions/suggestions before I start doctoring around on it. One thing that I noticed is that if I push capacitor C2 towards the op-amp, the noise increases and wise versa. Also, the noise level drops significantly (but doesn't disappear) when I physically touch the capacitor. There are also some very old style transistors on this thing (not the can ones but ones that look like cut in half. Any suggestions for a specific cause and quick fix of this problem? Which of the components would be most likely at fault?

Wed Jan 29, 2014 8:30 pm
User avatar

Joined: Sun Nov 09, 2008 2:49 pm
Posts: 733
Post Re: 2720 noisy VCA problem
Go through the procedure for testing and setting the trim, but also note the explanation about summing input control so there isn't too much which could cause distortion.


For the transistors, this topic covers the pin-outs for the various types we have included with the kits, matching them with the E(mitter), B(ase) and C(ollector) pcb points according to the silk-screened outline graphics.


Look for joints that didn't flow or may have bridged, verify all parts are installed as specified and confirm the +9 and +18 DC power supply voltages.

Scott Lee

Thu Jan 30, 2014 1:05 pm

Joined: Wed Jan 01, 2014 1:36 pm
Posts: 61
Location: Toronto
Post Re: 2720 noisy VCA problem
I posted an updated schematic a few posts down which might help a bit

Thu Jan 30, 2014 4:08 pm
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © phpBB Group.
Theme designed by Vjacheslav Trushkin , adapted for PAIA by Illumimedia Design Studios
./cache/ is NOT writable.