Can audio signals be input into the converter? Use it for simple distortion?

James

Yes, audio can be patched through this section or the inverter/gain section, or, the two series-connected.

The non-linear transfer through the L2E section would work to alter the waves from a VCO's triangle or sine waves, or, exaggerate signal peaks of music from a CD, MP3, etc. Settings could be such that clipping occurs, introducing this sort of distortion.

Clipping distortion can also be obtained through the inverter/gain section but the output would need attenuation to be brought back down to the same level as the input signal source.

nice....put another function under this module's description.. I'll try it out.