9700 Series, manual updates

Information on the PAiA 9700 Series modules and systems.
Locked
User avatar
PAiA-Scott
Posts: 741
Joined: Sun Nov 09, 2008 2:49 pm

9700 Series, manual updates

Post by PAiA-Scott »

Under this topic are updates to 9700 Series assembly and using manuals.
Scott Lee
scott@paia.com
User avatar
PAiA-Scott
Posts: 741
Joined: Sun Nov 09, 2008 2:49 pm

9748 Balanced Modulator, 3/1/10

Post by PAiA-Scott »

9748 Balanced Modulator Manual Update


The last sentence of the first paragraph on page 4 has the letter “e” missing from the word “be”. Please mark this in your manual.
Scott Lee
scott@paia.com
User avatar
PAiA-Scott
Posts: 741
Joined: Sun Nov 09, 2008 2:49 pm

9747 Passive Mixer / Splitter, 3/9/10

Post by PAiA-Scott »

9747 Passive Mixer / Splitter Manual Update


The Fig. 1 printed-circuit-board to front-panel assembly illustration should have the boards facing the other direction with J1 at the top of the panel and J8 at the bottom.

2/12/10 update:

The last sentence of the first paragraph on page 4 should read, “The two boards used for the module kit
do not utilize a connector (or wiring) at the P2 designation.”
Scott Lee
scott@paia.com
User avatar
PAiA-Scott
Posts: 741
Joined: Sun Nov 09, 2008 2:49 pm

9741 Dual VCA, 2/12/10

Post by PAiA-Scott »

Update to schematic for the values of Resistors R23 and R26. These resistors have been changed from 22k to 2.7k.

The printed-circuit-boards have been made with the 2.7k. The update pertains to the schematic.
21210note9741.pdf
(160.11 KiB) Downloaded 2465 times
Scott Lee
scott@paia.com
User avatar
PAiA-Scott
Posts: 741
Joined: Sun Nov 09, 2008 2:49 pm

9744 CV Source / Mixer/Attenuator, 2/12/10

Post by PAiA-Scott »

Update to the Mixer / Attenuator section Input labels and references.
21210update9744.pdf
(195.05 KiB) Downloaded 2491 times
Scott Lee
scott@paia.com
User avatar
PAiA-Scott
Posts: 741
Joined: Sun Nov 09, 2008 2:49 pm

9745 Mixer, 2/12/10

Post by PAiA-Scott »

This update is an acknowledgment of a paragraph appearing twice.

The paragraph beginning, "Use two..." is duplicated on pages 5 and 6.
Scott Lee
scott@paia.com
User avatar
PAiA-Scott
Posts: 741
Joined: Sun Nov 09, 2008 2:49 pm

9751 Noise Source, 2/12/10

Post by PAiA-Scott »

Updates pertinent to the Red Noise circuit Fc capacitor and panel/manual labels and references.
21210update9751.pdf
(68.02 KiB) Downloaded 2548 times
Scott Lee
scott@paia.com
User avatar
PAiA-Scott
Posts: 741
Joined: Sun Nov 09, 2008 2:49 pm

9752 Sample&Hold, 2/12/10

Post by PAiA-Scott »

Update to the 9752 manual schematic with changes of surface-mounted
resistor R4 to 100K and an added 0.22uF (220nF, possibly marked 224) at the capacitor C15 DoNotInstall (DNI) designation for an effective 330nF in this clock-circuit timing capacitance.
21210update9752.pdf
(144.05 KiB) Downloaded 2538 times
Scott Lee
scott@paia.com
User avatar
PAiA-Scott
Posts: 741
Joined: Sun Nov 09, 2008 2:49 pm

9756 Linear to Exponential Converter, 2/12/10

Post by PAiA-Scott »

This schematic updates Fig 2 of the 9756 manual with a change of the label for the connection to R9 from the negative supply to the positive (update to update--reference to 9752 should be 9756).
21210update9756.pdf
(121.87 KiB) Downloaded 2511 times
Scott Lee
scott@paia.com
Locked